The slim wood-and-aluminum lectern with a place for your name: a removable 24 by 5 inch panel across the front of the reading surface carries a logo. The top plate takes microphones, a reading light and power modules, and the wood comes unfinished, natural, whisky or mahogany.
Key features
- 24 inches wide, 20 deep, 45 tall; 46 lb
- Removable 24 x 5 inch logo panel, included
- 3/16 inch aluminum plate, powder coated light grey, with stainless steel bolts
- Front panel in 5/8 inch plywood: unfinished, or lacquered natural, whisky or mahogany
- Top plate has four positions for add-on modules, plus a spot for a reading light
- Shelf under the reading surface and an 18 inch paper stop
- Grommet in the base plate
- Stands on its own; no floor anchors needed
- Ships ready to assemble, with the tools in the box
| Dimensions | Overall Dimensions: 24"W x 20"D x 45"H (610 x 510 x 1143 mm). Paper stop: 18"W x 5/8"H x 1/4" thick |
|---|---|
| Weight | 46 Lbs. (21 kg) |
| Material | Top, base and frame: 3/16" thick aluminum plate, powder coated Front panel: 5/8" thick plywood, lacquered (or unfinished) Bolts: stainless steel |
| Finish | Choice of finishes. See the options |
| Technical | LED reading light On/off switch with a dimmer, on a 6 inch jointed arm. Works on 120 or 240 volts. The cable runs down inside the lectern, and the light mounts on a small plate that screws to a pre-drilled spot on the top. Gooseneck microphone 15 inch flexible arm with an XLR connector and a snap-on foam windscreen. Gooseneck mic, standard mount A female XLR socket the gooseneck mic clips into, with a 36 inch audio cable that runs down inside the lectern. Mounts on a small plate that screws to the top. Gooseneck mic, shock mount The same socket on a rubber shock mount that cuts bumps and handling noise, with a 36 inch XLR cable that runs down inside the lectern. Microphone holder with clip Holds your own handheld microphone. Mounts on a small plate with two screws. The mic's cable, if it has one, runs down beside the lectern, not through it. 25 ft audio cable Black connectors with gold contacts, 24 gauge pure copper conductors, a woven spiral shield and a thick PVC jacket. HDMI port Plug in any HDMI device at the top. Includes a 36 inch HDMI cable that runs down inside the lectern. Cable grommet A 1 3/4 inch opening in a small plate that fits the top, for passing your own cables through. Power outlet One 120 volt outlet, one USB and one USB-C port, with a 6 ft cord that runs down inside the lectern. |
| Assembly | Assembly required Assembly tools included |
Stain & color choices
- Unfinished
- Natural
- Whisky
- Mahogany
Free shipping
Every order ships free to the lower 48 states.
This item ships via DHL Express or UPS.
Lead time
Made to order. Approximate lead time is 1 - 2 weeks from receipt of order. Lead times are subject to change without notice due to production schedule.
Delivery
Delivered to your door by the carrier. Inspect the carton on arrival and note any damage on the delivery receipt so we can make it right quickly.
Assembly: Assembly required
Assembly tools included
2-year limited warranty
Covered against defects in materials and workmanship for 2 years from the date of purchase. If a problem turns up, email sales@podiumsdirect.com with your order number and a photo and we'll arrange repair or replacement. Normal wear, misuse, and alterations made after delivery aren't covered. Freight damage is handled separately: note it on the delivery receipt and contact us within 24 hours of delivery.
Returns & cancellations
30-day returns. Request a return authorization within 30 days of receipt by emailing sales@podiumsdirect.com.
Returns carry a restocking fee (25% minimum on lecterns, 15% on PA systems and accessories) and must come back in original condition and packaging, freight prepaid.